Capacitors Using Charge Sensors Lab Report Example | Topics and Well Written Essays - 1000 words

Capacitors Using Charge Sensors - Lab Report ExampleThe application of various capacitors with different content withal makes it important to determine unknown condenser besides voltage calculation by using the equation (Q=CV) Six different capacitors were obtained from the lab and their capacitance measured. A parallel circuit was created composing of 1.0F capacitor and 0.1F capacitor (making 1.1F. A second capacitor of 1.0F was supercharged into 5V. The charged capacitor was because touched to the 1.1F capacitor (uncharged) in the circuit. The 1.1F was again discharged. The aforementioned steps were wherefore repeated with a 0.1F capacitor used in place of 1.0F as the charge transfer capacitor. Then, instead of discharging the 1.1F capacitor the 0.1F capacitor was recharged to 5.0V followed by reconnecting it. The 1.1F capacitor was then charged to 5.0V followed by sharing its charge with uncharged capacitor that has unknown capacitance. The final reading was made from the vo ltmeter and then used to arrive at the unknown capacitance by use of the equation Q=CV. The unknown capacitance was then directly measured from the digital voltmeter. A parallel-plate capacitor was constructed through inserting a waxed typography in between aluminium plates. The construct was then pressed together by placing on top a 1.0kg weight. A charge sensor was then mounted with a 0.01F capacitor. The combined capacitance of 0.01F capacitor, together with the charge sensor, was then measured by using the digital voltmeters capacitance capability.